Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Long Beach Owner’s Guide
KraftMaid kitchen remodeling in Long Beach typically costs between $14,000 and $45,000 installed, depending on cabinet count, cabinet series, countertop material, and whether walls or plumbing move. Elmstead Remodeling Long Beach stocks KraftMaid-compatible hardware, hinges, drawer slides, and replacement cabinet components, and we install them with a written price before any work starts. Most owners discover they need us after a drawer stops closing, a hinge pulls loose, or a cabinet door hangs crooked no matter how many times they tighten the screw.
The symptom almost always starts small. A drawer drags. A door rubs against its frame. A soft-close mechanism stops catching. What began as a minor annoyance turns into a daily reminder every time you reach for a plate or a pan. By the time we get the call in neighborhoods like Belmont Shore, Bixby Knolls, or Alamitos Heights, the homeowner has usually lived with the problem for weeks, unsure whether the cabinet can be saved or whether they’re looking at a larger remodel. Most of the time, the cabinet box is fine and the part is the problem.
Which KraftMaid Models This Applies To
KraftMaid has manufactured several cabinet lines over the years, and the parts that fit one line often will not fit another. The three lines we see most in Long Beach homes are the standard KraftMaid cabinetry line sold through big-box retailers, KraftMaid Vantage for more affordable projects, and older KraftMaid lines from the 1990s and early 2000s that used different hinge cup sizes and drawer slide profiles. A hinge for a 2008 KraftMaid door will not necessarily fit a 2020 KraftMaid door, even if both are labeled as KraftMaid.
When we arrive, we look for the KraftMaid label inside the cabinet door or on the drawer box. The label gives us the cabinet series, the finish code, and sometimes a date stamp. We also measure the hinge cup diameter: most KraftMaid doors use 35mm hinge cups, but older lines used 26mm, and that detail alone changes which hinge we order. For drawer slides, we measure the slide length and the mounting profile. Aftermarket hinges from brands like Blum or Salice often work as quality equivalents on newer KraftMaid lines, but on older lines the original mounting holes rarely line up without modification. Graham Stein, owner of Elmstead Remodeling Long Beach, checks the label and the measurements before recommending OEM KraftMaid parts or a quality aftermarket equivalent, because the wrong hinge means a door that never closes flush again.
Styles & brands we work with
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Drawer slides that catch, stick, or fall off the track. The nylon rollers or ball bearings inside the slide wear down over years of daily use, especially in Long Beach’s coastal air, where salt moisture accelerates metal fatigue on cheaper slides.
- Hinges that let the door sag or refuse to close fully. The hinge spring loses tension or the mounting screws strip out of the particleboard cabinet frame. Once the screw holes are stripped, tightening them again only makes the problem worse.
- Soft-close mechanisms that stop catching. The small damper inside the hinge or slide fails first, usually on the two or three drawers that get opened the most in a family kitchen. When the soft-close goes, the drawer slams shut, and that slamming wears out the remaining parts faster.
- Cabinet doors that rub against each other or against the frame. This is usually a sign of hinge wear combined with humid air swelling the door edges slightly. Left alone, the rubbing wears through the finish and exposes raw wood or MDF.
- Drawer fronts that separate from the drawer box. The glued or stapled joint fails after years of opening and closing, especially on wider drawers that hold heavy pots or pans. We see this most often on KraftMaid drawers that were overloaded well past their weight rating.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For KraftMaid cabinet part replacement in Long Beach, the installed price usually falls between $400 and $1,800, depending on how many drawers and doors are affected and whether we’re swapping hinges, slides, or entire drawer boxes. A full KraftMaid kitchen remodel runs $14,000 to $45,000 when the job includes new cabinets, countertops from our Cambria or Silestone lines, and a Kohler sink or faucet. A smaller refresh keeping the existing cabinet boxes but replacing doors, hardware, and slides typically lands between $9,000 and $20,000.
What drives the range is part count and access. Two or three failing drawers costs less than fifteen. Drawer slides that can be swapped without removing the countertop cost less than slides buried behind a fixed panel. We write the line-item price before any work starts: the part number, the cost of the part, and the labor to install it. That written price is the price on the invoice when we’re done. The 365-Day Done Right Promise covers every part we install. If a hinge fails or a slide sticks within the year, we make it right.
DIY or Call Us?
Cabinet parts are not dangerous to work on the way a garage-door spring or an electrical panel is, but a wrong hinge or slide can damage the cabinet box in ways that cost more to repair than the original part would have. If you want to check something yourself, start by looking for the KraftMaid label inside the door or drawer and measuring the hinge cup diameter. If the screws are loose, you can try tightening them once, but if they spin without catching, the hole is stripped and the fix requires a dowel and new screw, not just a bigger screw.
Where DIY goes wrong is ordering the wrong part online, installing it, and discovering the door hangs crooked, rubs, or won’t close. We regularly replace parts that homeowners installed themselves after guessing at the model number. The door ends up scratched, the mounting holes get enlarged, and the cabinet looks worse than before. If you want the job done once, call Elmstead Remodeling Long Beach at (562) 512-7086. Graham will match the part to your exact KraftMaid cabinet line, confirm the written price, and send a uniformed, background-checked crew that wears shoe covers and lays down drop cloths before touching a single drawer.
FAQs
KraftMaid hinges and drawer slides typically last 10 to 20 years in Long Beach, but the coastal air shortens that lifespan on steel parts that sit close to the ocean, like homes in Naples or Belmont Shore. Soft-close dampers usually fail first, often within 7 to 10 years. Call (562) 512-7086 and we’ll tell you what’s worth replacing and what still has life in it.
Some can, depending on what failed. A stripped screw hole can be repaired with a dowel and re-drilling. A worn roller on a slide usually means replacing the entire slide, because the replacement rollers are not sold separately. A hinge with a broken spring gets replaced, not rebuilt. Graham will tell you which path makes sense before any money changes hands.
A drawer slide or hinge swap usually takes one to two hours for the first part and less per part after that. If we’re replacing multiple drawers and doors across a kitchen, the job typically wraps up in half a day. The drop cloths go down before we start, and the crew leaves a photo of the clean-up before they walk out the door.
We carry common KraftMaid-compatible hinges, drawer slides, and mounting hardware on the truck, along with parts for our other partner brands like Cambria, Silestone, and Kohler. Odd-sized or older series parts get ordered from the manufacturer with the exact model number from your cabinet label. Either way, the price is written down before we begin.
Written by Graham Stein, Owner, Elmstead Remodeling Long Beach at Elmstead Remodeling Long Beach, serving Long Beach and nearby areas.
