Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers: The Long Beach Owner’s Guide
Belgard driveway and paver replacement in Long Beach typically costs $7,000 – $18,000 for a full driveway installation, while smaller paver repair sections run $1,200 – $4,500 depending on square footage, base condition, and pattern complexity. We stock Belgard-compatible pavers, edge restraints, joint sand, and base materials on our trucks, so most repair jobs in Long Beach can be quoted and scheduled the same week. Most owners discover the failure the way you probably did: a paver that rocks underfoot, a low spot where water pools after rain, or an edge row that started drifting toward the lawn.
Which Belgard Models This Applies To
Belgard’s driveway and paver lines break into three families we work with regularly in Long Beach: the Holland Stone (60mm and 80mm thickness), the Urbana Stone (60mm, often used for patios and lighter traffic), and the Mega-Arbel and Acqua Roccia lines (80mm, rated for vehicular loads). The critical compatibility gotcha: not every Belgard paver is rated for driveway traffic. The 60mm Urbana stones handle foot traffic and patio loads fine, but if you want a paver surface that stands up to a minivan or an SUV every day, you need the 80mm Holland, Mega-Arbel, or similar vehicular-rated units. If your original installer used 60mm pavers on the driveway in Long Beach, that explains premature cracking, settling, and edge failure. When we quote a Belgard replacement, we always verify the paver specification against the actual use case before we write the price.
On the OEM-versus-aftermarket question: Belgard pavers are manufactured with a specific color blend and dimensional tolerance. Aftermarket look-alikes from other manufacturers will be slightly off in both, and the difference shows at the edge of the repair. For a seamless patch, we always source from the current Belgard Long Beach distributor when matching an existing installation. Elmstead Remodeling Long Beach is an independent service provider and is not affiliated with Belgard.
Styles & brands we work with
Signs Your Belgard Driveway & Pavers Is Failing
- Rocking or wobbling pavers underfoot. This means the bedding sand has washed out or compacted unevenly beneath the paver. In Long Beach’s clay-heavy soil, winter rains move fine sand through the joints and leave voids that cause individual stones to shift.
- Low spots or birdbaths where water pools after rain. The base layer has settled or wasn’t compacted to the right density when the driveway went in. Standing water accelerates paver deterioration and invites weeds.
- Edge rows drifting outward toward the lawn or planting beds. The edge restraint has failed or wasn’t installed. Without a solid restraint, the whole field of pavers slowly spreads, opening gaps along the perimeter.
- Wide, spreading joints between pavers. Joint sand is gone, usually from pressure washing at too high a PSI or years of Long Beach rain. When joints open up, pavers start shifting and the surface loses its interlock.
- Chipped, cracked, or spalled pavers. On a California driveway, this comes from two sources: vehicle weight concentrated on a thin paver, or water absorbed into the paver face followed by the rare Long Beach freeze. Spalled pavers let more water in, which accelerates the cycle.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full Belgard paver driveway replacement in Long Beach, we quote $7,000 – $18,000, and the range is driven by four things: square footage, the amount of excavation and base rebuilding the existing soil demands, the Belgard product line you choose, and whether we’re working around drainage, slopes, or existing concrete. For smaller repair sections, $1,200 – $4,500 covers removing the affected pavers, recompacting the base, adding new bedding sand, reinstalling pavers, and finishing with polymeric joint sand. Every quote from us includes the material list with named Belgard products, the hours we’ll need, and the written price before any work starts. We don’t start a driveway job without a written line-item scope, and we don’t change the price once we’ve agreed on it. The workmanship on every paver installation is covered by our 365-Day Done Right Promise: if it’s not done right after the job is complete, we make it right.
DIY or Call Us?
Some things you can safely check yourself: look at the edge restraints to see if they’ve pulled away, note where water pools after a rain, and measure the thickness of a paver if you have a loose one. But resetting pavers correctly requires more than lifting a stone and adding sand. The base underneath has to be compacted to the right density, the slope needs to drain away from the house, and the edge restraint has to hold the whole field under vehicle load. If pavers are rocking, edges are spreading, or water is pooling, a patch job that looks fine for three months will fail again after the first Long Beach rain. We’re happy to come out, assess what’s actually happening under the surface, and write you a price for the proper fix. Call (562) 512-7086 and we’ll schedule a time that works for your family.
FAQs
A properly installed Belgard driveway with an 80mm vehicular-rated paver, a properly compacted base, and maintained joint sand should last 25 – 30 years in Long Beach’s climate. The base typically fails before the paver does, which is why installation quality matters more than the paver itself.
Yes, in most cases we can remove and relay a failed section while matching the surrounding Belgard pavers. The key is recompacting the base under the repair area so the patch doesn’t settle below the surrounding field. Call (562) 512-7086 and we’ll tell you honestly whether a section repair is the right call.
Most Belgard driveway replacements in Long Beach take 3 – 5 working days from tear-out to final compaction, depending on size and access. A smaller paver repair section is usually done in 1 – 2 days. We give you the exact schedule in writing before we start.
We keep common Belgard sizes, edge restraints, and which includes polymeric joint sand on our trucks, and we source the specific Belgard color and series from the local Long Beach distributor to match your existing installation when you need a seamless patch. We’ll confirm availability and lead time on your exact product line before we quote the job.
Written by Graham Stein, Owner, Elmstead Remodeling Long Beach at Elmstead Remodeling Long Beach, serving Long Beach and nearby areas.
