Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Long Beach Homeowners Choose ES Windows Construction
We provide Es Windows service in Long Beach, including construction, repair, and service across the area from Belmont Shore to Bixby Knolls. Our crew has opened walls and reframed openings around ES Windows frames for years, so we understand exactly how their aluminum extrusions, anchors, and glazing behave in coastal salt air and older stucco homes. As an independent ES Windows service provider, we carry no factory tie and no sales quota – just field knowledge about what actually fails on these windows in Long Beach’s marine climate. Call (562) 512-7086 to talk through what you’re seeing.
Why Trust Elmstead Remodeling Long Beach for Your ES Windows Construction?
Graham Stein, owner of Elmstead Remodeling Long Beach, learned framing and finish work at Los Angeles Trade-Technical College before spending over a decade on Long Beach job sites. His crew has pulled apart ES Windows 3000 Series sashes in Naples Island condos, rebuilt Magnum Series multi-slide tracks in Belmont Shore, and re-flashed 6000 Series nail-fin frames on 1920s Craftsman bungalows in Rose Park. We use OEM ES Windows glass, weatherstripping, rollers, and hardware when the frame is sound and lead time allows. For discontinued finishes or small trim items, we substitute quality aftermarket parts that match factory tolerances. We do not patch a failing frame and call it done. If corrosion has eaten through the aluminum or an IGU seal has failed twice, we’ll tell you the honest truth and price a full replacement.
Every job starts with a written scope of work. Every job ends with a photo of the clean-up. The price Graham writes down on day one is the price on the invoice when we’re done. That’s not a slogan; it’s how we’ve run every project in Long Beach since the beginning.
Styles & brands we work with
Common ES Windows Construction Problems We Fix in Long Beach
- Chalky white oxidation on 3000 Series frames near the beach. Long Beach’s marine layer pushes salt-laden moisture onto aluminum frames every morning. The 3000 Series impact-rated frames hold up well structurally, but raw aluminum surfaces and stainless hardware near the coast develop a white, powdery corrosion film over time. We strip the oxidized layer, treat the surface, and re-seal with marine-grade protectant. Left untreated, the corrosion works into the bottom track and seizes the rollers.
- Hairline stucco cracks at 6000 Series picture window corners. This shows up constantly on older Long Beach homes where stucco was applied tight against the nail-fin frame. Stucco and aluminum expand at different rates through Long Beach’s daily temperature swings, and over a few years the plaster shrinks back just enough to open hairline cracks at the corners. Water finds those cracks, weeps down behind the stucco, and rots the sill and framing. We re-flash the opening, install a proper sill pan, and re-anchor the frame before patching the stucco. The crack was never about the stucco; it was about the flashing detail that was skipped on the original install.
- Fogged insulating glass units in Magnum Series fixed panels. The Magnum Series uses large fixed panels with dual-pane IGUs. When the desiccant inside the IGU spacer bar becomes exhausted – which happens faster in Long Beach’s persistently moist air – moisture gets trapped between the panes. The glass fogs, then clouds permanently. Glass-only replacement is possible when the frame is sound. We order the OEM IGU to factory specs, swap it in, and re-seal the panel.
- Seized or grinding rollers on multi-slide doors. Magnum and Heritage Series multi-slide doors run on bottom tracks that collect sand, salt film, and the fine grit that blows in from the port. The rollers seize slowly. Homeowners often notice the door getting harder to move, then suddenly impossible to close. We pull the panel, clean the track, replace the rollers with OEM or tolerance-matched aftermarket parts, and adjust the panel alignment so the door glides without dragging the gasket.
- Loose latches on 3000 Series impact windows after a few years. The 3000 Series impact-rated windows use compression latches that rely on precise frame alignment. Over time, subtle building settlement in Long Beach’s soft-soil neighborhoods nudges the sash out of square. The latch still engages but doesn’t pull the sash tight, which compromises the impact rating and lets drafts through. We re-square the frame, adjust or replace the latch hardware, and test the seal. In older beach cottages with significant settlement, we sometimes need to re-anchor the frame to the rough opening before the latch will hold properly.
ES Windows Parts & Our Repair-vs-Replace Approach
We stock OEM ES Windows weatherstripping, rollers, latch hardware, and fasteners for the 3000, 6000, Magnum, and Heritage lines. Glass IGUs and full frames are ordered per job from the ES Windows supply chain. When a finish has been discontinued or a small trim piece is backordered for months, we source quality aftermarket parts that match factory dimensions and tolerances – and we tell you before we install them. Here’s the honest repair-versus-replace line we hold: if the frame is structurally sound and the seal failure is minor, we repair. If corrosion has perforated the aluminum, the frame is racked beyond re-squaring, or the IGU has failed twice, we price a full replacement in the existing opening. Call (562) 512-7086 and we’ll walk through what your windows are showing us.
Our ES Windows Service Process – Step by Step
- 1
Diagnosis. We inspect the frame, track, glazing, anchors, and the wall assembly around the opening. On ES Windows jobs in Long Beach, that means checking the bottom track for sand and corrosion, the corner welds on 3000 Series frames, the stucco reveal around 6000 Series nail fins, and the IGU seals on Magnum and Heritage panels.
- 2
Repair or installation. We write the scope, give you the price, and do the work. For IGU replacements, we install OEM glass to factory tolerances. For frame work, we re-flash, re-anchor, and re-seal before touching any finish material. During the work, drop cloths go down, shoe covers go on, and quiet tools come out during nap and school hours where possible.
- 3
Testing. We cycle every moving panel, check every latch, and water-test flashing details before we call the job done. A window that looks right but doesn’t seal under Long Beach’s morning marine layer isn’t done.
- 4
Warranty and clean-up. Every ES Windows project is covered by our 365-Day Done Right Promise: if it’s not done right, we make it right. Before the crew leaves, we photograph the clean-up and you get a copy. That photo is proof, not a courtesy.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in Long Beach
We service and install the full residential ES Windows line: the 3000 Series impact-rated aluminum frames, the 6000 Series non-impact thermal-break aluminum windows, the Magnum Series heavy-duty multi-slide doors, and the Heritage Series custom wood-clad aluminum windows. We stock common rollers, latches, weatherstripping, and fasteners locally for fast turnaround. Glass IGUs and full frames are ordered per job. If you have an older ES Windows model that isn’t on this list, call us – we’ll identify the series, check parts availability, and give you a straight answer about repair versus replacement.
We Also Service These Brands
We’re not tied to one manufacturer. Our Long Beach crew also handles KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler fixtures. If your ES Windows project touches surrounding finishes – a sill, a stucco patch, interior trim – we handle the whole repair in-house as your General Contractor services rather than sending you to a second contractor.
FAQs – ES Windows Construction Service in Long Beach
No. We are an independent ES Windows service provider. We have no factory authorization and no sales quota. What we have is years of hands-on experience opening walls and reframing openings around ES Windows products in Long Beach’s coastal housing stock. Our recommendations come from field observation, not a manufacturer’s program.
The oxidation is salt-air corrosion on the aluminum surface. Long Beach’s daily marine layer deposits salt-laden moisture on metal frames, and over years the raw aluminum develops a powdery white film. It’s cosmetic at first but will eventually eat into the bottom track and seize rollers if left untreated. We strip the oxide, treat the surface, and re-seal with marine-grade protectant. Call (562) 512-7086 if you’re seeing this on your frames – early treatment is far cheaper than track replacement.
In most cases, you can replace just the IGU. Fogginess between the panes means the desiccant inside the spacer bar has been exhausted and moisture is trapped inside. The glass unit is replaced while the existing frame stays in the wall. If the frame itself is corroded or the IGU has failed twice, we’ll recommend a full replacement and explain why. Call (562) 512-7086 for an exact quote on your panel size and glass type.
Yes, but the window itself usually isn’t cracked. The stucco has shrunk back from the nail-fin frame due to differential expansion between stucco and aluminum in Long Beach’s temperature swings. That small gap lets water behind the stucco, where it rots the sill and framing. We re-flash the opening, install a sill pan, re-anchor the frame, and patch the stucco. The fix addresses the flashing detail, not just the cosmetic crack.
Yes. Magnum and Heritage Series multi-slide doors use heavier roller assemblies designed for large, multi-panel weight loads. Standard patio door rollers fail quickly under that weight. We use OEM rollers when lead time allows and tolerance-matched aftermarket parts when discontinued finishes or backorders require it. We’ll tell you which one goes on your door before we install it.
Costs depend on the repair and the model line. Here are the ranges we quote most often:
| Service | Long Beach Price Range |
|---|---|
| ES Windows single IGU replacement (glass only, in frame) | $900 – $2800 |
| ES Windows frame re-anchoring and re-flashing (per opening) | $1200 – $3500 |
| ES Windows multi-slide door track and roller rebuild | $1800 – $4500 |
| ES Windows full window replacement in existing opening | $4500 – $15000 |
These ranges reflect what we actually see across Long Beach, from Naples Island condos to mid-century tract homes in Los Altos. Your exact price depends on the frame condition, glass spec, and accessibility. Call (562) 512-7086 for a written quote – estimates are free and the price is fixed before we start.
That depends on the warranty terms and the nature of the service. Some ES Windows warranties cover IGUs and hardware for specific periods and may require replacement through an approved channel. We’ll review your warranty documentation with you before any work begins and give you the straight answer on what’s covered. If OEM parts preserve the warranty, we use them.
Book Your ES Windows Service in Long Beach, CA
If your ES Windows are fogging, sticking, corroding, or leaking in Long Beach, we’ll diagnose the problem and give you a written price before any work starts. Call (562) 512-7086 to schedule your free estimate. A live person answers, 24/7, not a voicemail box.
Written by Graham Stein, Owner at Elmstead Remodeling Long Beach, serving Long Beach for over a decade.
