Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Long Beach Owner’s Guide
If you have an Oldcastle kitchen product that’s failed or worn out, we stock and install Oldcastle-compatible replacement parts across Long Beach, with most kitchen remodeling projects priced between $14,000 and $45,000 installed. We’re not affiliated with Oldcastle, but we work with their product lines regularly enough to know what fails, what fits, and what doesn’t. Most owners discover the problem the way you probably did: a cabinet hinge that’s gone loose for the last time, a countertop seam that’s started separating, or a sink that’s begun to show wear no amount of scrubbing will fix. The good news is that in Long Beach, we can typically get your Oldcastle kitchen back to working order without a full gut job.
Key Takeaways:
- Oldcastle kitchen remodeling in Long Beach runs $14,000 – $45,000 installed, with smaller component swaps starting around $2,000.
- We match parts to your specific Oldcastle model, not just “close enough” substitutes.
- Written price before work starts, every time, on every project.
- 365-Day Done Right Promise: if it’s not done right, we make it right.
Which Oldcastle Models This Applies To
Oldcastle produces a range of kitchen product lines, and the compatibility questions we hear most often from Long Beach homeowners come down to cabinet hardware, countertop edges, and undermount sink fitment. The brand’s cabinet lines vary by year: older runs used 3/4-inch face frames with standard 35mm cup hinges, while newer lines moved to frameless construction with 1/2-inch panels and 105-degree opening hinges. You can check the inside of a cabinet door for a label or the hinge cup itself for a stamped number. The countertop and sink lines are more forgiving; most undermount sinks are a standard 1/8-inch reveal, but Oldcastle’s deeper basin models from 2015 – 2020 require a different mounting bracket than what the big-box stores stock. We carry those brackets on the truck, which means one trip instead of three.
When it comes to OEM versus aftermarket, here’s our honest position: for hinges and drawer slides, a quality aftermarket equivalent from Blum or Salice will in most cases outlast the original and cost 20 – 30% less. For countertop and sink parts, we recommend OEM where available. Oldcastle’s dimensional tolerances on their 2018-and-newer countertops are tight enough that a non-OEM undermount bracket can leave a gap you will see every time you load the dishwasher. Graham Stein, who runs Elmstead Remodeling Long Beach, keeps a reference binder with model numbers and mounting specs from every Oldcastle job we’ve done in Belmont Shore, Bixby Knolls, and Naples. If we’ve worked on your configuration before, we know exactly what’s needed before the truck leaves the yard.
Styles & brands we work with
Signs Your Oldcastle Kitchen Remodeling Is Failing
- Cabinet doors that won’t stay closed or aligned. This is almost always hinge cup fatigue. The original hinge loses tension after 8 – 12 years of daily use, especially in Long Beach’s salt air near the coast. The fix is replacing the hinge, not the door.
- A countertop seam that has started to separate or discolor. Seam failure usually means the original adhesive has hardened and shrunk, which happens faster in homes without central air conditioning. We see this a lot in older Naples and Belmont Shore homes where the kitchen gets direct sun through a south-facing window. The countertop can be re-seamed, but the surface needs to be dry and the edges cleaned before the new adhesive goes in.
- Drawer slides that grind or stick. The nylon rollers on the factory slides pick up sand and grit over time, especially in beach-adjacent Long Beach neighborhoods. Once the roller stops rolling and starts dragging, the slide needs to be replaced. Lubricant won’t fix it.
- An undermount sink that has dropped or pulls away from the countertop. This is a mounting bracket failure, plain and simple. Most undermount sink failures we see in Long Beach are because the original clips were not matched to the sink weight. A cast iron or composite sink needs heavier-duty clips than stainless.
- Edge banding that is peeling or lifting on cabinet boxes. Heat and humidity are hard on laminate edge banding, and kitchens over a garage or with a west-facing window in Long Beach will see the adhesive fail first. The fix is stripping the old banding, cleaning the edge, and applying a new band with a heat-activated adhesive.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Oldcastle kitchen remodeling and component replacement costs in Long Beach, installed:
| Service | Installed Price Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range comes down to three things: the size of the kitchen, whether we’re matching existing Oldcastle components or doing a full replacement, and the material choices you make. A countertop replacement in a 120-square-foot galley kitchen in North Long Beach runs differently than a full island build-out in a 400-square-foot Bixby Knolls kitchen. When we write your price, it’s a written price given before any work starts, every time. No estimates that grow after the crew arrives. That price includes the parts, the labor, the clean-up (drop cloths on the floors, shoe covers at the door, a photo of the clean-up before the crew leaves), and our 365-Day Done Right Promise. If it’s not done right, we make it right. The price I write down on day one is the price on the invoice when we’re done.
DIY or Call Us?
There are a few things you can safely check on your own before calling us in Long Beach. You can identify the model number on a cabinet hinge or drawer slide, take a photo of the failing component, and measure the cabinet opening or countertop section in question. That information helps us bring the right part on the first visit. What we advise against is attempting a cabinet hinge retrofit or any countertop re-seaming on your own. The hinge bores on Oldcastle cabinets are specific enough that a wrong-sized replacement will leave you with stripped screw holes and a door that hangs crooked. Countertop re-seaming requires a two-person lift or brace, and the adhesives used are not forgiving of uneven surfaces or dust. If the part involves any electrical work near the countertop or sink, that’s a stop point. Call us instead. We will come out, look at what you have, and give you a written price before any work starts. That number is (562) 512-7086.
FAQs
Most Oldcastle cabinet hinges we see in Long Beach last 8 – 12 years before the tension starts to go, with homes closer to the coast seeing slightly faster wear from salt air and humidity. If your hinges are failing at the 10-year mark, that’s within normal range for the brand. Call (562) 512-7086 for an exact quote; estimates are free.
In most cases, yes. Seam separation, edge chips, and minor surface scratches can often be repaired without a full replacement, especially if the countertop is a solid surface or natural stone. Call (562) 512-7086 and we’ll come out and look at what you have; the written price covers exactly what needs to be done.
Most single-component swaps, like cabinet hinges or a drawer slide replacement or an undermount sink re-mount, take 2 – 4 hours on site in Long Beach. A full countertop or cabinet replacement runs 1 – 3 days depending on the size of the kitchen and the materials involved. Call (562) 512-7086 for a more specific timeline on your project.
We keep the most common Oldcastle-compatible replacement parts on the truck: 35mm cup hinges, 105-degree opening hinges, undermount sink brackets, and drawer slide replacements in standard sizes. For less common components, we order directly from our supplier network and typically have the part in Long Beach within 2 – 3 business days. Call (562) 512-7086 and tell us your model number; we’ll tell you what we have ready to go.
If you’re in Long Beach and you have an Oldcastle kitchen component that’s failing, call (562) 512-7086 for a free estimate. We’ll come out, look at what you have, give you a written price before any work starts, and get the job done right. If it’s not done right under our 365-Day Done Right Promise, we make it right. That’s the promise, and it’s on every project we do.
Written by Graham Stein, Owner, Elmstead Remodeling Long Beach at Elmstead Remodeling Long Beach, serving Long Beach and nearby areas.
